PROGRAMMING A SYSTEM SALVO
To select a System Salvo for programming:
1. Move the cursor to the SALVO number.
2. Enter the desired salvo number (1 - 64) to program.
3. Press the ENTER key.
See page 4-2 for cursor movement instructions.
CAM (Camera)
To add or change a camera in a salvo:
1. Move the cursor to the CAM column and salvo position.
2. Enter the desired camera number (1 - 1024 for Real
camera numbers or 1 - 9999 for Pseudo numbers).
If the CN field is set to “S”, enter a System Salvo
number.
3. Press the ACK key.
Note: To eliminate a camera from a salvo, press the ENTER
key without entering a number in the CAM field.
PRE (Preset)
If a preset scene is desired for the camera:
1. Move the cursor to the PRE column and desired camera
position.
2. Enter the preset number (1 - 72) to call for this camera.
Zero represents no preset call for this entry.
3. Press the ENTER key.
Note: If the CN field is set to “S”, do not enter a preset scene.
AUX (Auxiliary)
If an auxiliary action is desired for an entry:
1. Move the cursor to the AUX column and desired camera
position.
2. Press the ENTER key to cycle through the AUX
selections. Press the NEXT key to accept the selection.
or
Enter one of the following numbers and press the
ENTER key. The selection will appear in the AUX
column.
1 = 1 ON 5 = 1 OFF
2 = 2 ON 6 = 2 OFF
3 = 3 ON 7 = 3 OFF
4 = 4 ON 8 = 0 - (no action)
Note: If the CN field is set to “S”, do not enter an auxiliary
action.
CN (Connect Next)
To include the next camera, or another System Salvo:
1. Move the cursor to the CN column for the desired
position.
2. Press the ENTER key to cycle through the CN
selections. Press the NEXT key to accept the displayed
selection.
or
Enter one of the following numbers and press the
ENTER key. The selection will display in the CN
column entry.
1 = N, no connect next
2 = Y, connect to the next entry
3 = S, call a System Salvo
All positions in a System Salvo should have the CN entry set
to Y except the last entry, which is set to N or S.
On the first Salvo entry line, if an actual camera number
matches the salvo number, only “Y” or “N” can be selected.
If a System Salvo is selected (S), the CAM number for this
position must be set to the desired Salvo number.
Note: If Pseudo numbers are used, the CAM number switches
between Pseudo numbers when N or Y is selected and
Real numbers when S is selected.
Example: In a six camera salvo (Salvo 01), set position 5 to
Camera number 17, Preset number 5, Auxiliary 3 ON, and
Connect Next to the last camera position, Camera 18.
SET SYSTEM SALVOS
SALVO - 01
POS CAM PRE AUX CN
1 0001 00 0 - Y
2 0002 02 0 - Y
3 0003 03 0 - Y
4 0004 04 0 - Y
5 0017 05 3 ON Y
6 0018 00 0 - N
.
16 0016 00 0 - N
PREVIOUS MENU
CALLING A SYSTEM SALVO
To call a System Salvo from a keyboard:
1. Call the first monitor of the desired group of monitors.
2. Enter the desired System Salvo number (1 - 64).
3. Press the SALVO key.
Refer to page 2-8 for further description of salvo operation.
4-9
AD1024 MENU PROGRAMMING
(96 strony)
(264 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji