American Dynamics AD1650B Instrukcje Operacyjne

System Programmingfor the AD1650BMicroPower EP SystemProgramming and Operating InstructionsThis manual describes the system programming and operating

1-4

2-1Keyboard ControlThis section of the manual describes the standard AD1650B system videoswitching and control capabilities that are provided from an

KEYBOARD CONTROLKeyboard Passcode EntryPasscode entry is a security procedure to allow only authorizedpersonnel to operate the AD1650B system. When U

Keyboard Video SelectionNote: Keyboard video selection is available from any ADkeyboard connected to the AD1650B. The keyboardcontrol functions desc

Controlling Camera Site FunctionsCamera site control functions (pan/tilt, motorized lens, presetscenes, and auxiliary actions) are available at the ke

Running a TourA Tour sequentially displays a selected series of camera videoinputs on a single monitor. A single tour sequence may display64 separate

Calling a System SalvoA System Salvo is a group of cameras that can be called forsimultaneous display on a contiguous group of monitors.System Salvos

3-1Non-Menu ProgrammingThis section of the manual describes the AD1650B system non-menuprogramming capabilities. These setup operations are accessed

NON-MENU PROGRAMMINGThe following non-menu setup programming functions areaccessible from AD1678CM or AD2078 keyboards only.NOTE: The keyswitch must

Monitor Display ArrangementThe arrangement of the titles, date, and time in the monitor on-screen display (Figure 2-1) may be changed by keyboardcomma

This software/firmware is confidential to and is copyrighted by SENSORMATIC ELECTRONICS CORPORATION. It is not tobe copied or disclosed in any manner

Programming Monitor ToursA Tour sequentially displays a selected sequence of cameravideo inputs on any monitor. A Monitor Tour is a temporarysequence

Arming MonitorsSystem monitors are armed using a Monitor Arming Codewhich identifies the alarm Display method (Single, Block, orDual monitors), Queuin

Programming Alarm ContactsNote: The following contact programming procedures are forAD1678CM keyboards only. For other keyboards, usethe Monitor/Con

4-1Menu ProgrammingThis section of the manual describes the AD1650B menu programmingcapabilities.Menu Programming...

MENU PROGRAMMING All the features of the AD1650B are programmable using on-screen menus. The menus are displayed via a separate videooutput (labeled

Menu Cursor Positioning/PagingThe following cursor instructions apply to all menus.To position the cursor to a desired location on the menu:• Use the

SET TIME AND DATEThe SET TIME AND DATE menu permits setting the dateformat, date, time, and day of the week for on-screen displays.DATE FORMAT - Sele

SET SYSTEM TOURSA System Tour is a programmable sequence of cameras thatcan be called by a user to be displayed on the called monitor,or called by Ev

PROGRAMMING A SYSTEM TOURTo select a System Tour for programming:1. Move the cursor to the TOUR number line of the menu.2. Enter the desired tour numb

CN (Connect Next)If a salvo or tour switching is desired at a tour entry:1. Move the cursor to the CN column and desired entry line.2. Press the ACK k

CONTENTSPageDESCRIPTION... 1System Features ...

SET SYSTEM SALVOSA System Salvo is a group of cameras that can be calledsimultaneously to a contiguous group of monitors. A salvo canbe called by key

PROGRAMMING A SALVOTo select a System Salvo for programming:1. Position cursor to the SALVO line in the menu. 2. Enter the desired salvo number (from

SET EVENT TIMERSEvent Timers permits automatic callup of System Tours and/orAlarm Monitor Contact Tables. Each one of the automaticcallups is referred

Alarm Monitor/Contact (ALM ) callupSeparate Monitor/Contact Tables can be programmed to definewhich alarm contacts are armed for each monitor in the s

SET ALARM CONTACTS The SET ALARM CONTACT menu is used to associatecameras to contacts. A maximum of 512 entries are allowed.Each Alarm Contact Number

PROGRAMMING ALARM CONTACTSAlarm Contact Numbers 1 to 128, 129 to 256, 257 to 384, and385 to 512 are defaulted to cameras 1 through 128,respectively.

CN (Connect Next)For salvo switching on alarm contact receipt:1. Position the cursor to the desired CN column and ACN.2. Press the ACK key to cycle th

MONITOR STATUSThe MONITOR STATUS display provides information aboutthe 16 monitors connected to the system.This display has two pages, with eight moni

MONITORThe MONITOR menu is used to review and change eachmonitor's setup programming.To select a Monitor for review or programming:1. Place the c

## (Block number) - The block number field associatesmonitors together to form a monitor “block” for alarm callup.A monitor block may consist of any

CONTENTSPageMENU PROGRAMMING... 4-1Main Selection Menu...

CAMERA MENUThe CAMERA menu is used to re-assign camera numbers andto program camera titles. Each selection of the CAMERAmenu calls up another menu, s

TITLEThe Camera TITLE menu is used to program a 16-characteralphanumeric title for each camera, for inclusion in the on-screen display.To select a cam

PORTThe PORT menu is used to configure baud rates, data bits,parity, stop bits, and port use for each of the four RS-232 portson the rear of the AD165

PORT USE TypesALARM - Used for an Alarm Interface Unit connection for input of alarm codes to the AD1650B. Each alarm event messagesent to this port

ACCESSThe ACCESS menus define system partitioning which controlsoperator keyboard access to monitors, cameras, pan/tilts, andalarms. System partition

KEYBOARD/MONITORThe KEYBOARD/MONITOR menu defines the Keyboard-to-Monitor access which prevents selected keyboards fromcalling selected monitors. The

KEYBOARD/CAMERA VIEWThis menu defines the Keyboard-to-Camera viewing access,which prevents selected keyboards from calling up selectedcameras for view

KEYBOARD/CAMERA CONTROLThis menu defines the Keyboard-to-Camera control accesswhich prevents selected keyboards from controlling remotefunctions on se

MONITOR/CAMERA ACCESSThis menu defines the Monitor/Camera access which preventsselected monitors from viewing selected cameras.In this menu it is the

MONITOR/CONTACT ACCESSThe MONITOR/CONTACT ACCESS menu defines whichalarm contacts are associated to each monitor in the system.Five Monitor/Contact Ta

SYSTEM FEATURESVideo Switching Control: The AD1650B controls videoswitching of all camera inputs and all monitor outputs in theswitching system. Swit

PRIORITY MENUThe PRIORITY menu is used to:• Enable (or disable) user identification passcode entry intothe system, • Configure each of the eight prior

SET USERIf USER IDs is enabled, the SET USER menu is used to set apriority level and passcode for each of 48 users. Each prioritylevel is defined thr

SET PRIORITYThe SET PRIORITY menu is used to define the configurationfor each of the eight priority levels. All levels default to thesame configurati

AppendixSystem Defaults... A-2Alarms ...

AD1650B SYSTEM DEFAULTSThe following are the factory default values; these are set from the System Reset function, page 1-3 or 3-2.Keyboard ControlAll

ALARMS - PROGRAMMING OVERVIEWAn ALARM is a signal generated by an external device that isconnected to an AD Matrix Switching System, either directly

ALARMS - MONITOR ARMING CODEThe Monitor Arming Code identifies the alarm Display,Queuing, and Clearance methods for the monitor.Alarm Display Methods

ALARMS - ARMING NOTESAssociating Alarms with Camera SalvosEach alarm contact may be associated with a camera salvo forcallup when the alarm is receiv

ALARMS - MONITOR ARMING CODES - ARM TYPESThe following are the available Monitor Arming Codes for theAD1650B. Each is identified by the code number,

BLOCK Display, HOLD Queuing(10) BHI - Multiple monitor alarm block, all armed/alarmedcontacts are queued and displayed on monitors with noexisting al

System Status Display: The current camera-to-monitorswitching assignments can be displayed by operator request.This display includes the current statu

ON-SCREEN STATUS LINE DISPLAYSSetup/ProgrammingThe following messages appear in the monitor on-screen StatusLine during certain non-menu programming f

A-9AD1650B APPENDIXAmerican Dynamics KeyboardsKeyboard AD2078,Model NumberAD1678C AD1678CE AD1678CM AD1678CME AD1677 AD1677E AD1676B AD1676BE AD1672AT

REMOTE COMPUTER CONTROLThe four AD1650B RS-232 control ports use asynchronous,full duplex, RS-232C protocol. As shipped, all ports are set foroperati

AUXILIARY KEY CODE FUNCTIONSF1 - Special function key:1 F1 - Unlocks the current camera2 F1 - Locks the current camera99 F1 - Logoff from passcode

An American Dynamics ProductDesigned and built bySensormatic CCTV Systems DivisionOne Blue Hill PlazaPearl River, New York, 10965(914) 624-7600Technic

1-1System OperationThis section of the manual provides an overview of the system operationand setup programming functions.System Operation . . . . .

SYSTEM OPERATIONThe AD1650B Central Processing Module controls all MatrixSwitching System operation and provides programming menusfor AD1650B System s

System Reset Following initial AD1650B system installation or a major re-configuration of the switching system, it may be necessary toclear all progra