American Dynamics ADCIPE3712OSPE Instrukcja Konfiguracji Pobierz pdf (Strona 6)

Quick Setup Guide

5. Install, configure and set the IP Dome Camera

The CAMERA default setting is DHCP OFF. Users can build the CAMERA working environment with a static IP

address. The default static IP is 192.168.1.168. You can set an IP address for the CAMERA if the LAN unit isn’t

connected to a DHCP server. Or turn on to use the DHCP protocol if the DHCP server is working in the LAN,

the CAMERA will obtain an IP address automatically from the DHCP server. The CAMERA is linked by its

Video Out connection via a BNC connector to a monitor's Video In connection. If this connection is there, you

can see some information on the monitor screen, such as the CAMERA factory default Static IP address.

1. Check the IP class of your PC

Step 1: Select Settings from the Start menu, and then click Control Panel.

Step 2: Double-click the Network Connections icon. The Network Connections dialog box appears.

Step 3: Click the Protocols tab in the Network Connections dialog box.

Step 4: Select Internet Protocol (TCP/IP) and click Properties.

Step 5: Select Use the following IP Address to indicate that you do not wish to use DHCP, and assign IP

Address 192.168.1.200 with Subnet mask 255.255.255.0. Click OK when you finish.

Step 6: Choose Close to finish the modification.

2. Install UPnP Packets of your PC

Microsoft Windows XP

does not start the UPnP service by default. Some packets must be installed before it is

initialized, as described below.

Step 1: Select Set Program Access and Default from the Start menu.

Step 2: Click the Add/Remove Windows Components button when the Add or Remove Programs dialog

box appears.

Step 3: Check the Network Services in the Windows Component Wizard dialog box, and then click Details.

Step 4: Check UPnP User Interface, and choose OK.

Step 5: Click Next when the original Network Component Wizard dialog box returns. After about one minute

the UPnP installation is complete.

Step 6: Select Finish to close.

3. Turn on Services of your PC

After installation, turn on the relative services to start the UPnP protocol. The following procedures will

demonstrate this.

Step 1: Select Settings from the Start menu, and then click Control Panel.

Step 2: Double-click the Administrative Tools icon. The Administrative Tools dialog box appears.

Step 3: Click the Services icon in the Administrative Tools dialog box.

Step 4: Double-click the SSDP Discovery Service icon when the Services dialog box shows up.

Step 5: Choose Automatic in the Startup type, and click OK to start it. The Services dialog box appears

again.

Step 6: Double-click the Universal Plug and Play Device Host icon.

Step 7: Choose Automatic in the Startup type, press the Start button, and click OK to start it.

Step 8: Restart your system.

4. Set the static IP address in the IP Dome Camera.

Step 1: Plug in the IP Dome camera’s power connection.

Step 2: Plug the USB connector to your PC and the USB socket on the left flank panel. A window pops up

asking if you want to "Run the program", "Open folder to view files", or " Take no action".

Step 3: Choose "Run the program" and click "OK", and the "USB configuration " window will pop up.

Step 4: Set the Network setting and type in the IP address you desire. Before you change the IP address, you

should note the factory default Static IP address ( 192.168.1.168 ).

Step 5: Click the "Apply" button in the "USB Configuration” window. A message pops up asking you to affirm

the action as "OK".

Step 6: Click "OK", and remove the USB connection from the window.

Step 7: Click "Exit" at the bottom of the "USB Configuration” window to close the window. Or, choose the

"Launch" button to see the local camera images directly. Before clicking "Launch", check your PC's IP

address and use the Network connector ( RJ-45 ) to link up with your camera.

Step 8: If you can see the images, then the IP setting is complete.

5. Scan IP Dome Camera through “My Network Place”

After your installation and starting services, the UPnP protocol will take effect.

Step 1: Scan all IP Dome Camera in My Network Place.

Step 2: Double click the IP Dome Camera icon, and the video live stream will pop up automatically without

assigning any IP address in Microsoft Internet Explorer.

6. Change the IP Dome Camera's control and operational settings.

Step 1: Enter the IP address in the IE Browser. You will now see the IP Dome camera images.

1 2 3 4 5 6 7

Komentarze do niniejszej Instrukcji

Brak uwag

American Dynamics ADCIPE3712OSPE Instrukcja Konfiguracji Strona 6

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Kamery ochrony American Dynamics ADCIPE3712OSPE